Hero product
P40 — multi-function handheld laser welding machine
Six pieces of equipment that used to arrive as six boxes, integrated into one system you can wheel to the job and weld from.
In one paragraph
What the P40 actually is
The P40 is Han's Laser's multi-function handheld laser welding machine: wire feeder, laser source, welding torch, control system, outdoor power supply and gas cylinder in one unit. The source weighs under 29 kg and the torch under 480 g, with a T-mode that lifts penetration by about 10%.
Send material, thickness and a photo of the joint. You get price, lead time and shipping in the same conversation.
Core features
Six details that decide whether the P40 works in your shop
Multi-function integration
Wire feeder, source, torch, control system, outdoor power supply and gas cylinder in one package. Nothing to assemble on site, nothing to forget in the van.
Torch under 480 g
A torch light enough to weld overhead and vertical seams for a full shift without your wrist deciding when the day ends.
T-mode, +10% penetration
Switch to T-mode and the same machine reaches roughly 10% deeper into the material — more margin on the joints that were always marginal.
152 + 520 parameter sets
152 simplified presets for operators who just want to weld, and 520 professional sets for the jobs where you tune gas, focus and speed yourself.
3,000+ bench tests
Every unit goes through more than 3,000 performance tests before it ships.
24-hour duty
Rated for continuous 24-hour operation — sized for a production cell, not a hobby bench.
Specifications
Published figures
Matching Han's Laser's own parameter table. If you need a figure that is not here, ask — we will send the page it came from.
- Laser source weight
- Under 29 kg
- Welding torch weight
- Under 480 g
- T-mode penetration gain
- ≈ +10% vs standard mode
- Preset parameters
- 152 simplified / 520 professional
- Pre-delivery testing
- 3,000+ performance tests per unit
- Duty cycle
- 24 h continuous operation
- Configuration
- Six components: source, torch, wire feeder, control, outdoor supply, gas cylinder
- Service life
- Rated for extended production use
Certification
Seven marks, documents on request
We send certificate copies rather than asking you to trust a badge row.
Ask on WhatsApp and we send the actual certificate documents, not a row of badges. Certificate numbers are quoted on the document itself.
FAQ
P40 questions we get asked weekly
How thick can the P40 weld?
It depends on material and joint type, but as a working rule the P40 handles the 0.5–4 mm range that most sheet-metal and stainless fabrication sits in. Deep single-pass penetration on 6–7 mm plate is the job of the water-cooled WSH07T-CW, not this machine. Send us your thickness and joint drawing and we will tell you honestly whether the P40 is the right unit.
What materials can it weld?
Stainless steel, carbon steel, galvanised steel, aluminium and copper are all weldable with the appropriate parameter set and, where needed, filler wire. Two practical caveats: coated and galvanised stock needs the coating cleaned back at the seam, and copper is weldable as sheet or plate but copper wire is not supported as filler on this platform.
Is it really portable?
The source is under 29 kg and the torch under 480 g, and because the outdoor power supply and gas cylinder travel with the system you can weld in a yard, on a mezzanine or at a customer site without hunting for a socket and a bottle. It is one-person portable, not pocket-portable — treat it as a two-wheel trolley load, not a suitcase.
What certifications does it have?
PLD, CE, FCC, FDA, MD, 3C and NAL. We send the actual certificate documents on request rather than asking you to trust a row of badges.
How do I get a quote?
Message us on WhatsApp at +86 137 0255 6158 with the material, thickness and a photo of the joint. You get a price, a lead time and a shipping estimate in the same conversation — we do not run an online checkout for industrial equipment.
Does it come with training and support?
Yes. We commission remotely over video, walk your operator through the 152 presets for your materials, and stay reachable on WhatsApp for parameter questions. Consumables — protective lenses, nozzles, filler wire — ship from Guangzhou on a repeat basis.
What is the warranty?
Twelve months on the machine, optical consumables excluded. One exclusion worth knowing before you buy: faults caused by arc-welding interference on the same site are not covered, so if you run TIG or MIG next to the laser, tell us at order stage and we will advise on separation and grounding.
Get P40 quote on WhatsApp
Tell us the material, the thickness and where the machine will work. We will confirm the configuration and the landed cost.